Surrey Forklift Training School

Surrey Forklift Training School - Why People Who Utilize A Forklift Should Take A Forklift Training School - CSA and OSHA establish criteria for forklift safety training which meets existing regulations and standards. Anybody planning to use a forklift is needed to successfully complete safety training prior to making use of any kind of forklift. The accredited Forklift Operator Training Program is meant to provide individuals training with the information and practical skills to become a forklift operator.

Vehicle and Mobile Equipment safety regulations that apply to forklift use include pre-shift inspections, and rules for lifting and loading.

An inspection checklist must be done and submitted to the supervising authority prior to beginning a shift. When a maintenance problem is uncovered, the use of the particular machinery must be discontinued until the problem has been dealt with. To be able to indicate the equipment is out of service, the keys should be removed from the ignition and a warning tag placed in a visible location.

Loading safety regulations comprise checking the rating capacity on the forklift nameplate and knowing if the load weight falls within capacity. The forklift forks must be in the downward position when the forklift is starting up. Keep in mind that there is a loss of roughly one hundred pounds carrying capacity for every one inch further away from the carriage that the load is carried.

To be able to safely lift a palletized load, drive the forklift toward the pallet and stop with the fork three inches away from the load. Level the mast until it is at right angles to the load. Raise the forks to an inch beneath the slot on the pallet and drive forward. Then lift forks four inches. Tilt back the load to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk in order to alert other personnel. Never allow forks to drag on the ground.

Click to Download the pdf